Silica Gel Packets for Moisture Control
It is a water-removing agent that absorbs moisture from the atmosphere. The principle of drying is to physically adsorb water molecules in their structures or chemically absorb water molecules and change their chemical structure to become another Kind of substance.
Silica Gel Packets for Moisture Control Details:
1-3mm 2-4mm silica gel beads
Moisture absorption, humidity remove, shelf life extension.
Non-toxic, eco-friendly, DMF free, FDA approval, MSDS available
Kept in a cool, dry place. Make it sealed after using
Sofas, mattress, large packing boxes.
0.5gram, 1gram, 2 gram, 3gram, 4gram, 5gram, 6gram, 8gram, 10gram, 15gram, 20gram, 25gram, 30gram, 50gram, 100gram, 120gram, 200gram, 300 gram, 500 gram, 1000 gram, etc. (OEM service is welcome)
Silica Gel Packets for Moisture Control Features:
1. It is a water-removing agent that absorbs moisture from the atmosphere. The principle of drying is to physically adsorb water molecules in their structures or chemically absorb water molecules and change their chemical structure to become another Kind of substance.
2. The main component is silica gel, which is purified from natural minerals into granules or beads. As a desiccant, its microporous structure has a good affinity for water molecules. The hygroscopic environment of silica gel is room temperature and high humidity, which can reduce the relative humidity of the environment to about 40%.
3. It is mainly used for drying and moisture proof and can be used as a catalyst carrier and dehydration purification of organic compounds. Because of its high bulk density and low humidity, the moisture absorption effect is obvious. It can be used as an air purifier to remove moisture from the air to control the humidity of the air. It is also widely used in shipping, and it can also be used as dehumidification between two parallel sealing glass plates to maintain the transparency of the glass.
How to reuse it?
After the silicone turns yellow, it means that it has been saturated. If it is to be reused, you can open the bag, put it in the prepared container, and put it into the microwave to heat it. The temperature is higher than 100 degrees and the heating time is 15 minutes, the silica gel becomes transparent. After heating, put it into a sealed and dry container. After the silica gel is cooled, take it out and put it in a breathable cloth bag. The time of repeated use is not as long as the first time. Change the situation and replace the desiccant in time.